Viking Juice Juice Lubes 130ml
Viking Juice is an advanced chain lube designed to work well in wet and dry conditions. It will remain in the chain for a much longer period than conventional lubes, increasing chain life. That is our take on it but if you want a bit more info Singletrack Magazine tested it for 400 miles of tough as nails Scottish XC and came away praising it as quite possibly “the holy grail of chain lubes”. We were pretty happy about that!
Originally designed with Magnus Backstedt, to last the entire Paris –Roubaix race and keep him smiling! Check out www.bigmaggys.com for more info and great Coffee!
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application. Viking Juice is very runny, so take care not to open the valve too much otherwise it will end up on the floor!
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply up to 4 layers of Viking Juice , allowing at least 2 minutes between each layer for the lube to penetrate and “set-up” correctly.
Ideally you would apply Viking Juice after you have cleaned your bike having finished a ride. This would give the chain lube the maximum amount of time to set up properly giving maximum performance on your next ride and stopping any corrosion occurring in the meantime.